Technical data : Peugeot 208T16
Evolutions 208 T16 Click here
Type EP6 CDT
Location Transverse Front
Capacity 1598 cc
Number of cylinders 4
Power (bhp.DIN) 280bhp at 6,000rpm
Torque (Nm) 400 Nm at 2,500rpm
Max engine speed 7,500rpm
Injection Magneti Marelli High Pressure Direct
Intake Single throttle
Number of valves 16
Mode Four-wheel drive
Clutch Dual disc
Gearbox Five-speed with sequential control
Differential Two self-locking differentials
Structure and materials Shell + Tubular roll-over bar
Front suspension Pseudo MacPherson
Rear suspension Pseudo MacPherson
Front brake Alcon 4 pistons, Ø 300 (gravel) 355 (asphalt)
Rear brake Alcon 4 pistons, Ø 300 (gravel) 355 (asphalt)
Steering Direct with hydraulic assistance
Wheels Aluminium monoblock 8?x18? (asphalt) / 7?x15? (gravel)
Asphalt wheels 225x40x18
Dirt wheels 215x65x15
Length Idem standard 3,962mm
Width 1,820mm
Wheelbase 2,560mm
Minimum weight 1,230 kg (asphalt) / 1,230kg (gravel)

Technical data : Peugeot 208R2
Type EP6C (special pistons, con-rods, camshafts).
Cubic capacity 1.598cc
Bore x stroke 77mm x 85.8mm
Maximum power 185hp at 7.800rpm
Maximum torque 19m.daN at 6.300rpm
Specific power 116hp/litre
Fuel tank 60 litres
Fuel injection Indirect (Magneti-Marelli), motorized single throttle valve,
Chain-driven Double overhead camshafts with VVT intake and exhaust timing
Gearbox Five-speed sequential manual gearbox with three homologated final drive ratios
Differential Pre-loaded limited slip differential
Clutch Hydraulically operated cerametallic single clutch plate (diameter 184mm)
Front brakes Ventilated discs and radial-mount four-piston floating-calipers
? asphalt 310mm x 30mm (diameter x thickness)
? gravel 285mm x 26mm (diameter x thickness)
Rear brakes Solid discs 290mm x 8mm (diameter x thickness) and radial-mount two-piston calipers
Handbrake Hydraulic
Power steering Hydraulic
Front MacPherson type with specific uniball-jointed wishbones
Specific interchangeable front anti-roll bar (3 stiffnesses choices) with plain bearings
Specific cast aluminium struts (camber adjustment at pivot).
Rear Strengthened H-beam modified to fit an interchangeable anti-rollbar (choice of 6 stiffnesses)
Front/rear dampers Specific three-way Öhlins dampers with adjustable hydraulic bump stops
Structure Bodyshell reinforced by welded, multipoint FIA-approved rollcage specific steel
& underbody shielding
Weight Minimum weight (FIA regulations) 1.030kg (unladen), and1.190kg (with crew)
Front/rear distribution 64% / 36%
Length/width 3.962mm / 1.739mm
Wheelbase 2.538mm
Front/rear track 1.475mm / 1.470mm
Wheels/tyres Asphalt ? wheels 6.5 x 16 / Michelin Pilot Sport tyres (19/60-16)
Gravel ? wheels 6 x 15 / Michelin tyres (16/64-15)


By continuing your visit to this site , you accept the use of cookies to deliver content and services tailored to your interests. Read more X